Jeep Renegade

TypeDrawer/FiledescriptionSize

JPG
P1030444 Extigy with IR Extension Wire (yellow Bands) Sitting on Top of Hdpe Backing. Hole in Middle is for Zip Ties7.2M

JPG
P1030445 5.1 Channel Output with Mini Stereo Jacks6.7M

JPG
P1030446 Front Panel End of IC Board, Mini Stereo Jack Next to Two Optical Spdif is for Line in6.7M

JPG
P1030447 Board with Made up Harness for Input, Output, and 12v Power6.2M

JPG
P1030448 Radio out with Harness Unwrapped, Line Level Converter Below Radio, DSP IC Board with Wires Ready for Placement Above Glove Box7.2M

JPG
P1030449 Board Will Go up Beteen the Right and Left Braces and the Hdpe Backer Will Be on the Brace with Two Bolts6.4M

JPG
P1030450 Looking up Between the Braces the Upper Edge of the Board Will Be on the White Poly Padding6.5M

JPG
P1030451 Close up of Empty Space with Poly Padding4.8M

JPG
P1030452 Board in Place, Zip Tie through Center Hole Visible6.8M

JPG
P1030453 Edge of IC Board Visible, Honeycomb Cover at Center is Cabin Filter, Two Metal Clips at Bottom Are for the Lower Glove Box Screws6.7M

JPG
P1030454 Broader View Showing 6 of the Seven Metal Clips for Fastening the Glove Box and the Soft Panel Loosened on Floor6.7M

JPG
P1030455 Glove Box Assembly in Place with Lamp Wire Plugged in6.6M

JPG
P1030456 Looking toward the Center Console Showing Wires Routing up toward Radio with Zip Tie Around Existing Wire Harness6.5M

JPG
P1030457 Glove Box Damper is on the Center Console Side and the Wires Need to Clear This Moving Part6.6M
Download